Hardware components
All components necessary to build LoRaBridge bridge and gateway units are listed below. Please note: the components listed here are the ones used to build the first proof-of-concept LoRaBridge implementation with verified functionality. Some components such as different Raspberry PI models or other Zigbee coordinator sticks might work out-of-the-box. Other components like external LoRaWAN gateways or alternative LoRa modems require adjustments to the LoRaBridge software.
Table of components
| Device | Manufacturer (link) | Distributor (link) |
|---|---|---|
| Raspberry PI 4B | Raspberry PI Foundation | |
| Adafruit LoRa Funk Bonnet mit OLED - RFM95W @ 915MHz | Adafruit | Sertronics |
| CC2652RB Zigbee USB development stick | slae.sh | Ewelink |
| Dragino PG1301 LoRaWAN GPS Concentrator | Dragino |
Hardware Setup
Bridge
To set up a bridge you need:
- Raspberry Pi 4
- Power adapter
- Micro SD card (16+ GB recommended)
- Adafruit LoRa Funk Bonnet mit OLED - RFM95W @ 915MHz
- CC2652RB Zigbee USB development stick
Gateway
To set up a gateway you need:
- Raspberry Pi 4
- Power adapter
- Micro SD card (16+ GB recommended)
- Dragino PG1301 LoRaWAN GPS Concentrator
